Delta has launched a wide collection of kitchen and bathroom faucets, with the majority with the sprayer hose. So it’s crucial to know how to disconnect sprayer hose from Delta faucet.
There are occasions when the faucet or the sprayer might break and water flows through only one of them. Also, there may be leaks in the hose that is used to spray that need replacement of it. Maybe you’re planning to replace your sink and would like a different type of faucet that does not have the sprayer hose.
If you’ve got a similar one that’s causing you difficulties, you will find out how to repair it by yourself. If the hose for the sprayer is leaking, then you may have to replace either the head of the spray, the hose, or both in order to resolve the issue. Here is how to replace kitchen sink sprayer hose.
Before Tackling the Hassle of Replacing
A mineral build-up over the sprayer’s nozzle could be the reason for the issue with the sprayer. Before replacing the hose, try soaking the sprayer’s head in the bowl of warm vinegar in order to dissolve any mineral that could be the cause of the issue. This will allow the nozzle to function properly and if it doesn’t then replace the entire system.
Before you begin the procedure of clearing the deposits probably the hose assembly is outdated and replacing the fixture is necessary to ensure your daily comfort.
To make the procedure better, let’s first know how the sprayer hose gets linked with the tap.
The Connection of Sprayer Hose With a Faucet
Based on the type of faucet you have there could be various types of connections between the faucet and the sprayer hose. For instance, if the tap in your kitchen is a sprayer faucet, then there could be no hose for the sprayer at all. Because the main water source will only supply the sprayer.
However in the event that the sprayer and faucet are different, then we must use a hose to connect the sprayer to the source of the water. The sprayer hose first connects to the main supply of water before connecting to the sprayer to create a continuous water line.
The connection between the sprayer hose and faucet hose will have a divider, therefore both the faucet and sprayer have a source of water. This is the basic structure of the water supply in your kitchen.
There are three main types of Delta faucets that have sprayer hoses:
- Type 1. The center kitchen faucet is set with two handles: the faucet, shutoff valves for hot and cold water, as well as the veggie sprayer, are arranged in a line on the sink.
- Type 2. Single handle widespread kitchen faucet that has a separate veggie sprayer.
- Type 3. One handle pullout kitchen faucet the spout of which spout doubles as the vegetable sprayer.
You must find out the type that you are using and follow the directions in accordance with the type.
8 Steps How to Disconnect Sprayer Hose from Delta Faucet
Follow the steps below to find out how to disconnect sprayer hose from Delta faucet, replace the components as needed and put the entire assembly back in place.
Required Tools and Materials
It is essential to have all the required items for this DIY process prior to start since it will help you to save time and release you from the hassle of shopping last minute. These can be found at the majority of homes improvement stores as well as stores for kitchen plumbing supplies which have everything you need.
- Adjustable wrench
- Basin wrench
- Screwdrivers for sprayers
- Two pairs of channel-type pliers
- One sprayer replacement kit
- One small bucket
- One plumber’s putty
Step 1. Examine the Problem
Before moving on to the next project, you must identify where the issue is, and then decide what you need to replace.
> Turn on the faucet.
> Hold the spray head in your hands and find the location of the leak.
> Press the button, and then check for leakage.
> Turn off the tap.
> The sliding nut must be unscrewed with a screwdriver, then taken off from the spray head.
> Again switch on the faucet and look for leaks.
> When the seal on the crimp on the hose is leaky it is necessary to replace the spray head and the hose.
> If there’s no leak around the crimp area, the spray head is in good shape. If this is the case replacing just the spray head can solve the issue.
Step 2. Permissible Quick Fixes of the Problem
It is possible that you do not have to replace the part in any way. The issue may be quite minor and is easily solved by the following methods:
> Turn on the faucet, and utilize a flashlight for a visual inspection beneath the sink. If the stem connection is leaking drag it with pliers or a basin wrench. In case there’s no leakage following tightening the connection, then no replacements are required.
> It could be due to mineral deposits that are on the sprayer’s head that are causing the problem. Put the sprayer heads in the vinegar solution in a bowl and then leave it in the same place for about two hours. Take it out of the solution when all particles have dissolved.
If these fixes do not aid in repairing the leak, you’ll be left with only one option left: remove the entire assembly and replace the damaged parts.
Step 3. Shut off the Water Supply
First, in order to change the sprayer hose that is used from the delta faucet, you must shut off the supply of water by closing the shut-off valves to the faucet beneath the sink, diverter, or the valve that shuts off the water supply to the entire home and then remove the water left through the sprayer.
The diverter redirects the water flow from the tap to the sprayer, and it is activated in the event that the sprayer’s turned on.
Step 4. Disconnecting the Old Sink Sprayer Hose
If you have any of the Delta faucets the first thing be able to accomplish is disconnecting the sprayer hose to the tube that is an outlet.
It’s simple because it is a snap-on connect. The steps to follow are:
> Underneath the counter find an outlet pipe. Locate the sprayer hose which is attached to it.
> Find out if there’s a clip that secures the sprayer hose in the outlet tube. If there is, take it off and put it aside (you require it to secure the hose of the sprayer back onto).
> Set the bucket in a way that, when you unplug the sprayer hose, the leaved water will be able to flow into the bucket (from both the outlet tube and the sprayer pipe).
> You might need to pull or press at the connection to remove the sprayer hose, based on the type of connection.
> If you have a pull-out type of faucet, a weight will be placed through the spray hose. Take it off.
Step 5. Taking off the Sprayer Head
We need to take off the head of the sprayer. Following next instructions for type 1 as well as 2 of Delta Kitchen Faucets:
> Remove the sprayer head from the hose, by rotating the slide nut counter-clockwise and putting it aside.
Note: If you’ve used it for some time it could be accumulating mineral deposits around the threads that make up the head of the sprayer. This can make it hard to open or turn it. To bypass this problem, mix white vinegar and water in equal quantities and soak the sprayer head in this solution. After half an hour or so, you will be able to take the sprayer head off the hose.
For Type 3 of the pullout sprayer, the head is also the faucet’s spout. The instructions to follow are:
> The sprayer should be pulled out.
> Make a loop using the sprayer’s hose to ensure that it won’t be able to go back into the faucet’s neck.
> Find out if the sprayer is connected to the head via the snap-on/quick release connection, or is a threaded connection.
> If the connection is quick release, press on the button, then remove the sprayer head.
> In the event there is a threaded connector, make use of a wrench to loosen the nut and take off the head of the sprayer.
Perhaps that is a good idea to take the sprayer head along with the hose for a trip to the house improvement store or hardware store to buy a replacement sprayer from any manufacturer among the available brands.
Step 6. Prepare Replacement Parts
After you’ve dismantled the sprayer hose assembly, it is time to replace it using new components. Here’s how to get it replaced:
> In case, the warranty on your Delta faucet sprayer is valid, you can contact the company’s customer support service. They will send you new parts that are necessary.
> If the warranty has expired, you’ll be required to visit the hardware store to get the sprayer head along with the hose on your own.
Step 7. Reassemble the Faucet Sprayer
After you’ve taken off the old sprayer hose assembly and bought a brand new one now is the time to put it back together.
> Attach the hose back to the sprayer head.
> Place the hose into the hole of the sprayer to connect the type 1 as well as Type 2 faucets.
> Insert the hose through the faucet’s neck for the pull-out style.
> Check that the head of the sprayer is fully back into place.
> Underneath the counter find an outlet tube.
> If you have a pull-out model you can put the sprayer hose through the weight.
> Attach the sprayer hose with the outlet tube.
> If it was equipped with a clip, fix it.
> Tug a bit on the hose of the sprayer to ensure it’s secure.
Step 8. Try Your New Project
After you’ve learned how to disconnect the sprayer hose from Delta faucet and you’ve replaced the damaged components with new ones and now you are ready to test the project a run-through. What you should try to determine whether everything is functioning properly right now:
> Switch on the shut-off valves under the sink. You’ll have to turn them clockwise to accomplish this.
> Check if the leakage coming in the sprayer hose has been solved.
> Switch on the faucet and push the trigger on the head of the sprayer.
> Examine if the water flowing properly from the sprayer.
If everything goes as planned and the final results are what you desired, then you’re done with the task.
Video: How to Disconnect Sprayer Hose from Delta Faucet
In this video, learn how to easily replace a standard Delta kitchen faucet pull-down spray wand with an upgraded spray wand featuring Delta ShieldSpray Technology.
Conclusion
So, you can see how simple it was to learn how to disconnect sprayer hose from Delta faucet. Don’t let the leaky faucet bother you every day when an easy solution can fix the issue. Anyone can accomplish this once you’ve worked out the root of the issue. Plus, you won’t have to pay the plumber. The only things you’ll spend on are low-cost spare parts.
