How to Remove Shower Handle Without Screws – Helpful Guide

The handle of your shower is an important element in the shower that controls the stream and the temperature of the water. However, not all showers are identical. Some of them have handles with hidden screws, while others don’t have any evident method to change or take off the screws. But, eventually, it becomes an issue of how to remove shower handle without screws.

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review

Handles of the shower are frequently used and will get worn out with time. Learning how to change any kind of shower handle by yourself can give you a sense of achievement and can save you money since you don’t have to hire an expert.

This article will explain all you must be aware of shower handles that come with no screws or concealed screws. Furthermore, this article will provide you with the tools needed and provides a step-by-step procedure for taking off the shower handles.

Why Should You Take off the Handle from Your Shower?

There are a variety of reasons you could need to remove shower faucet handle without visible screws and there are a few of them as follows:

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review
  • First, you might require removing the faucet handle in case you are replacing an old or damaged faucet handle with a brand new one.
  • The next reason to take off the handle of the faucet is to replace the cartridge of the faucet.
  • You’ll also have to take it off in the event that you have to find and repair the leak.
  • Removing the spoiled filter can also mean that you remove a shower handle.
  • Finally, taking off the faucet handle is essential in order to clean the inside of the handle.

The Function of the Shower Handles

Consider the handle of a shower as a valve for water. The shower’s water is coming from the hot and cold water supply lines. As you twist the knob, the valve opens, and water begins to stream out of the faucet for the shower.

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review

If you rotate the handle in the opposite direction the water’s stream stops. The cartridge inside the shower handle is accountable to control water flow by using the handle of the shower.

Shower Handles in Various Types

There are a variety of knobs and shower handles and most do not feature visible screws. Most likely, the shower handle has screws, but they’re concealed away from view so that your shower has an elegant view.

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review

Before we provide our detailed user manual on how to remove shower handle without screws. Let’s look at the different kinds of shower handles.

Lever Handles

The lever handles are bar-formed and support the pivot. They are available in a variety of designs, styles, and finishes. The handles typically include screws that are latent beneath the cover or faceplate. So the replacement of the lever handle usually requires the removal of the faceplate for access to the screws that are latent.

Knob Handles

Knob or twisting handle reminds the handles for doors and is available in a variety of styles like a globe, jewel shape, or square. To access to hot or cold water or shut off water flow is necessary to make a round movement.

They could include hidden screws or no screws altogether. Sadly, there’s no way of defining the method of removal until you know what type of handle you have.

Cross Handles

Cross handles look like an X-shaped form. They are the most comfortable to grasp and come with a retro appearance. They function in the same way as knob handles. The cross handles may be equipped with hidden screws or without screws the same as knob handles.

Therefore, the removal procedure is dependent on the determination of if the handle is screwed in or screw-less.

Double Faucet Handle

Double handles feature two handles that are separate, with each handle regulating the cold or hot water flow. Faucets with two handles typically have knob or cross handles and are usually used in older houses. Double faucet handles could require to be removed or they can include hidden screws. Here is how to replace a two handle bathtub faucet.

How to Remove Shower Handle Without Screws

The faucets can be a single faucet handle as well as a double handle. The techniques for removing them are different as well. Below we’ll indicate the methods of removing the various types of faucets.

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review

Required Tools

  • Allen wrench
  • Flathead screwdriver
  • Hex key
  • Adjustable wrench
  • Pliers Some cloth
  • Distilled white vinegar (if necessary)
  • Lubricant or Rust Cleaner (if required)
  • A handle puller set (if needed)

The Removal of a Shower Handle That has the Hidden Screw

Step 1. Start by shutting off the water supply to your home. This could be done by turning off the water in the bathroom or by shutting off your water source to your whole house.

Step 2. Take off the faceplate. It is possible to do this using a towel by twisting it off. If the faceplate is bolted use an adjustable wrench to pull it out. Apply a lubricant such as WD-40 when needed.

Step 3. Examine the inside of your handle. Make use of distilled white vinegar to wash any part that requires cleaning. It is necessary to find the name of the maker of the shower handle on the faceplate, or on the handle itself.

Step 4. Check with the manufacturer if have any issues.

Step 5. Find the button or the cap on the handle of the shower, typically to the side or near the top of the handle.

Step 6. Make use of a flathead screwdriver to take off the cap or the button cover. The screwdriver’s tip between the wall and the cap and make use of the screwdriver as a lever for removing the cap. Be cautious as you don’t intend to damage anything. After you’ve removed the base or cap on the shower handle, you are able to begin the process of taking off the actual handle.

Step 7. After you’ve removed the cap from the outside, the screws will be opened. With the proper size Allen wrench or the hex key, remove the screws cautiously. Make sure to seal the drain so that no screws or components get lost.

Step 8. Now there must be a possibility to remove the handle with your hands.

Step 9. If you notice soap residue or corrosion on the shower handle you can try distilled vinegar, or a rust cleanser to take off the rust.

Step 10. You’ve now taken off your shower’s handle with success. If you plan to reinstall the identical handle, ensure that you keep all of the screws secure and make notes of how you took off the handle, you can quickly reverse the process and put it back in place.

The method above is applicable to taking off lever, cross, or twist handle. If you have two handles for the faucet shower, you’ll have to repeat the procedure twice, once for each hand.

In many showers handles the screws are typically concealed behind a shower cap or plate. Once that is removed, it’s an issue of using the appropriate Allen wrench or hex key to take off the showerhead.

How to Take off the Shower Handle Without Screws

To take off a shower handle that doesn’t have screws in the first place may sound difficult but it’s not too different from the procedure described earlier. You’ll require an additional tool to take out the showerhead with no screws, but you won’t need the services of a professional plumber to accomplish the task.

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review
  1. Shut off the water supply, and then close the drain.
  2. Take off the base/plate by putting the cloth over it and then twisting. If the plate doesn’t seem to be moving try to add grease or rust cleaner.
  3. After the plate has been taken off, you will be able to see a mark with the name of the shower maker.
  4. Visit the website of the shower manufacturer or refer to the user’s guide to find out what information is available about removing the handle of the shower.
  5. In case the shower handle has no screws, and you cannot get an explanation from the maker, you can make use of the faucet puller to take off the handle.
  6. Pursue the directions on the faucet puller, and utilize the instrument with care to take off the handle of the shower. It is possible to place some cloth or a towel between the handle of your shower and the wall to prevent any damage.
  7. After the handle has been taken off, the handle can be cleaned using distilled white vinegar or a rust cleanser should you require it.

How Can You Take off the Lever-Style Faucet Handle Without Screws or Caps?

This type of faucet handle is totally distinct from the two faucet handles that we’ve discussed previously. Additionally, the process of removing it is very different from other types of handles for faucets. The technique for removal is described below:

How to Remove Shower Handle Without Screws - Helpful Guide Sink and faucet review

Step 1. Take off the Button

It is important to be aware that the faucet handle is extremely delicate and you must be careful when handling it. The lever-style handle comes with two buttons, the cold and hot buttons. Take off the buttons carefully using your screwdriver with a flat head.

Step 2. Take off the Allen Key

This faucet handle does not have screws, but instead, it has an Allen key. Take off the Allen key using your Allen wrench.

Step 3. Draw the Faucet Handle out

After you have removed the Allen key, you are able to take the faucet handle out. After the faucet handle has been removed you will see the cartridge and you’ll be able to access it to replace it in the event that it’s damaged.

Video: How to Remove Shower Handle Without Screws

In this video, how to replace a shower faucet trim plate, handle, shower arm, tub spout, and bathtub drain Moen DIY.


How do you remove a Kohler shower handle without screws?

In case there aren’t any screws in place, then you’ll need to unscrew and take off the retainer. For a complete detailed procedure lookout to the Kohler website for assistance.

How do you take off a shower handle?

Step 1. Shut off the water supply.
Step 2. Threaded set screw.
Step 3. Take off the handle from the valve. In case the handle is corroded: add the plumber’s grease.
Step 4. Take off the trim plate.
Step 5. Wrap faucet stem with Teflon tape.
Step 6. Screw handle.
Step 7. Change trim plate.

How do you remove an old shower lever?

Step 1. Take off the Button.
Step 2. Take off the Allen Key.
Step 3. Draw the Faucet Handle out.

What’s the role of the cartridge in the tap?

The purpose that the cartridge performs is to regulate how much water flows.


There are several kinds of faucet handles that do not have screws. The process of removal of each one is different from one another. Therefore, prior to taking off a shower handle, it is important to know the procedure for removing it.

Shower handles that don’t have screws may look attractive, but it can be difficult for you to take them off if attempt the first time. To take off your shower faucet’s handle with no screw visible and without strain, it is possible that you will need to learn how to remove shower handle without screws.

Leave a Comment